Choosing an air conditioner is not easy you have to consider several factors. What size do you want? Just how much will it cost to operate and how noisy will it be? We’ll help you to select the best model for your home.
Types of an air conditioner
Split-Air Conditioner: All these have two parts: an outside compressor unit and an indoor unit attached to pipes. They are mostly used to cool one or more rooms, or an open space, of up to 60 square meters.
Multi-split: a kind of split-system, with a single outdoor unit connected to two or more indoor units. This is sometimes a fantastic way to heat or cool more than one or two rooms which are pretty close to each other when a separate split-systems or a ducted system isn’t possible due to space limitations.
Ducted: The very best option for temperature control throughout a large home, this contains a fundamental unit joined by ducts to air outlets and sensors in each room, using a control panel to set the desired temperatures and the areas of the house to cool or heat.
Wall/window: These models are often set up in a window or outside wall, and can cool chambers and open-plan regions of up to 50 square meters. Smaller units may be plugged into a normal power point; larger ones may require additional wiring.
Inverter or non-inverter?
After deciding these all things, you also need to consider whether to go to buy an inverter ac or if you want both cooling and heating option or cooling mode only.
Inverter: These versions can regulate the compressor speed. That means the compressor doesn’t have to switch off and on continuously, but you need to just speed up or down as per demands. By not really needing to stop and start several times a day, there is less strain on the compressor and less power is used, therefore inverter models are typically more efficient and it takes very less cost to run. Most split systems on the market available are inverter types.
Are you looking for an inverter air conditioner then check here best inverter ac in india and then buy the best one for your home
Non-inverter: Also referred to as standard air conditioners, the compressor in the outside unit is either on at full power, or off. The compressor switches on and off as per demands. This can cause more wear and tear on the compressor and uses more power to start up each time, so that these models are not as effective to operate as inverter model are, but may be cheaper to buy.
Reverse-cycle: Reverse-cycle models may be used for cooling in summer and heating in the winter. While the purchase and installation costs can be high in contrast to an electric heater, reverse-cycle air conditioners are actually among the cheapest and best forms of heating for large distances within the long term. Even if you only need heating for a couple of days or weeks every winter, a reverse-cycle model could be your very best option.
Cooling-only: in the event that you simply require the air conditioner for cooling. then a cooling-only air conditioner could be the right option for you. They are normally more affordable than reverse-cycle models and most have all the very same features.